CVC 耐磨型旋转阀
陶瓷内衬或碳化钨涂层，专为高磨蚀性粉体设计。
The CVC puts the wear where it can be replaced. The body carries 8 mm ceramic wear plates and the rotor tips are tungsten carbide coated, so the tip gap can be brought back to 0.10 mm on site instead of replacing the valve.
Typical duty is cement and clinker, fly ash, limestone and mineral fillers; body and rotor are cast iron, SS304 or SS316L depending on temperature and medium.
A heat-isolated end cover keeps bearing temperature below 90 °C where the material runs hot. The rotor can be open, closed or adjustable-tip, and the wear plates are a stock item.
Specification
| Nominal size | DN 300 |
|---|---|
| Size range | DN 150 - DN 600 |
| Max differential pressure | 1.5 bar |
| Temperature range | -20 – 300 °C |
| Throughput | 1 - 12 t/h at 20 rpm |
| Motor power | 2.2 kW |
| Weight | 260 kg |
| Surface finish | Cast finish, ceramic lined |
| Flange drilling | DIN PN10, ANSI 150, JIS 10K |
| Lead time | 4 weeks ex works |
Max 1.5 bar differential, -20 °C to 300 °C, 8 mm ceramic wear plates with tungsten carbide coated tips.
Where this valve is used
Documents
- CV Series Datasheet PDF · 922.0 B
- CVB General Arrangement Drawing PDF · 894.0 B